Uninterruptible Power Supplies   UPS Monitoring
-----------------------------------------------------------------------------------------------------------------------------------------
 
  500va to 10kVA
Comms rack and tower UPS models for small sized applications >		  

NetMAN 102
Allows UPS to connect directly to RJ45 to provide web-browser based monitoring and remote alerts. Device is powered by the UPS itself and is configured using Telnet or Hyperterminal and fully supports SNMP MIB RFC1628.
more>

Compatibility Vision, Premium, Dual, Power, Starlet M, Vega, Sirius
-------------------------------------------
  10 to 80kVA
Single and three phase UPS models for medium sized applications >
-----------------------------------------------------------------------------------------------------------------------------------------
CS121 Network Adaptor
Allows UPS to connect directly to RJ45 to provide web-browser based monitoring and remote alerts. Please note a local UPS backed mains socket and RJ45 port are required. Fully supports SNMP MIB RFC1628 (MODBUS as option).
more>

Compatibility Starlet, Planet, Hyperion, Saturn (other units on request)
-------------------------------------------
  100 to 800kVA
Large UPS models
to cater for whole floors or entire buildings >
  Service Agreements
24-7 callout,
preventative
maintenance,
spare parts		  
-----------------------------------------------------------------------------------------------------------------------------------------
MultiCOM 302 (user manual)
Protocol converter may be used to monitor the UPS using MODBUS/JBUS protocol on RS232 or RS485 serial lines. It can also manage a second independent RS232 serial line that can be used to connect to other devices.

Compatibility Vision, Premium, Dual, Power, Starlet M, Vega, Sirius
  Delivery & Associated Services
-------------------------------------------
Site Surveys and Pre Sales
-------------------------------------------
Low Voltage Switchgear 
-------------------------------------------
Diesel Generator Sets
-------------------------------------------
Central Battery Systems
-------------------------------------------
UPS Network Monitoring
-----------------------------------------------------------------------------------------------------------------------------------------
MultiCOM 382 (user manual)
Device that is installed into UPS comms slot to provide 4 hardwired 240V rated relays for ‘On battery’, ‘On bypass’, ‘Battery low’ and ‘Common alarm’ signals. Also includes an EPO interface and an 8 sec delay facility to filter unwanted signals.

Compatibility Vision, Premium, Dual, Power, Starlet M
 

-----------------------------------------------------------------------------------------------------------------------------------------

I/O Alarm Card
Internal board providing 6 off configurable output contacts to provide UPS status and alarm signals to BMS system. Also incorporates 2 off configurable inputs that can used to inhibit battery recharge whilst using an upstream Diesel Generator.

Compatibility Sirius, Sirius P
-----------------------------------------------------------------------------------------------------------------------------------------

MultiPANEL
Desktop or wall mounted panel displaying full operating status, alarm conditions and digital metering using a backlit LCD screen. Up to 3 panels can be connected
in series with the ability of full integration into most BMS systems.
more>

Compatibility Vision, Premium, Dual, Power, Starlet M, Vega, Sirius
-----------------------------------------------------------------------------------------------------------------------------------------

RemoteMIMIC
Wall mounted panel providing operating status, alarms and the advantage of full digital metering at a remote location. Incorporates a series of LEDS combined with an LCD screen and audible alarm.
more>

Compatibility Starlet, Planet, Hyperion, Saturn
-----------------------------------------------------------------------------------------------------------------------------------------

RemoteSTATUS
Wall mounted panel providing operating status and alarm conditions using a series of LEDs. Panel also incorporates an auidible alarm. Please note that an internal
PCB board may need to be fitted to UPS.
more>

Compatibility Starlet, Planet, Hyperion, Saturn
© copyright cps ltd | terms & conditions | site by boxred.co.uk downloads | contact | recruitment